The MS 200 applies hot-melt in the form of 43mm slugs, granules and pillows. It does not require compressed air and with 600 Watts power it is ready to go in 5 minutes. Application temperature is adjustable up to 200 deg. C
A unique ergonomic shape and an adjustable trigger enables the user to work comfortably and without fatigue.
An integrated magnetic foot provides a stable base on magnetic surfaces.
A wire-stand provides a secure stand on non-magnetic surfaces. In combination with a variety of available nozzles the MS 200 serves almost every application conveniently, flexibly and professionally.
The TR 60 Hot-Spray-System consists of the TR 60 glue gun and the stand on which the gun may be deposited.
Melting and pressure-sensitive glues can be dispensed from the smallest points of approx. 0,1 g to 100 m long and 2 – 150mm wide normal jetting patterns, extremely thin or millimeters thick. The control of the compressed air and the manometer are integrated in the stand. Precise adjustment of the compressed air ensures an optimum and accurate application of the glue. The adjusted air pressure can always be checked at the indication of the manometer. The electronic temperature control is integrated in the handle for easy operation. You adjust the optimum temperature for the selected glue from approx. 50 to 210°C. The electronic temperature control ensures an optimum operating temperature, simultaneously providing a careful handling of the material to be glued. The electronic system responds to the slightest deviation.
Spraying glues has many advantages.
The glue can be dispensed on difficult, inaccessible spots without any problem. Using pressure-sensitive glues you achieve a permanent application with unlimited open times (which so far could only be obtained by double-faced adhesive tapes). When applying or spraying melting and pressure-sensitive glues no solvents detrimental to health are released. Thanks to the great variety of Reka accessories you can choose an appliance configuration adapted to your individual requirements.
The glue gun TR 50.4 works with melting glues of high and low viscosities in granulate and stick forms.
You adjust the desired temperature between approx. 20 and 200°C; so you always operate at the temperature prescribed for the glue.
Heating and thermostat are installed directly behind the nozzle, this makes sure that the glue is dispensed at the optimum temperature.
Due to the extremely low weight and the balance within the instrument the work is not tiring and your wristle will not be strained.
Meler handguns are robust and reliable mechanical components that guarantee a high level of precision and uniformity in the application of adhesive. They are easy to operate, lightweight and versatile due to their 360º angle rotation.
Uniform heat is maintained throughout the system from tank to gun nozzle. A safety catch prevents the trigger from being accidentally operated.
The swirl hand gun can be used to deposit a spiral of adhesive on to any surface. They also increase the area glued while considerably reducing adhesive consumption. The complete manual system is supplied with an air regulator set.